Slide background
Slide background

PeM Washer-650

Washing Line Model 650

pem-650

The stainless steel machine includes a 640mm working width conveyor with ø 25mm rollers, that allows to treat printed circuits with minimum size 90 mm (length) and 25 mm (width).
The module is suitable to clean and wash the board's surface.

Base machine description

Line equipped with:

  • N. 4 washing sections
  • N. 1 pair of cylindrical nylon brushes
  • N. 1 drying section with a couple of special air-jet blowers, fed by a double wheeled turbine
  • N. 1 section with thermoadjustable warm air.The first washing section is complete with pre-washing
  • N. 3 pairs of spraying manifolds, followed by a pair of nylon brushes.
  • The pump sends the water from the first tank to a cartridge filter, which feeds the spraying manifolds.
  • The following section is complete with n.1 pair of spraying manifolds fed by a pump.
  • The pump sends the water from the second tank to a cartridge filter, which feeds the spraying manifolds.
  • The third section is complete with n. 1 pair of spraying manifolds fed by a pump.
  • The pump sends the water from the third tank to a cartridge filter, which feeds the spraying manifolds.
  • The fourth section in complete with n. 1 pair of spraying manifolds fed by a relative pump.
  • The pump sends the water from the fourth tank to a cartridge filter, which feeds the spraying manifolds.
  • The line is fed by city water from the fourth tank.
  • The water back cascades from this section to the previous ones.
  • The water flow is visualized by a flowmeter and adjusted by means of a manual valve.
  • Over the first two washing tanks are placed removable drawer filters.
  • The final drying section is complete with a couple of special air-jet blowers fed by a double wheeled turbine, placed inside the machine.
  • A more effective drying is achieved by means of a final section with thermoadjustable warm air.
  • The conveyor speed is adjustable.
  • The economy system provides for water and power saving with machine in stand-by.
  • As an option, the following devices can be applied to the machine:Heater for warm water:
  • This application allows to warm the water in the first washing tank and, on request, also in the second tank.

Options

  • Second pair of horizontal nylon brushes
    • A second pair of horizontal nylon brushes can be placed after the first washing section for a more effective cleaning of the boards.
  • Vertical brushes
    • Two additional rows of vertical brushes can be placed between the second and the third washing section to complete the cleaning of the upper side of the boards.
  • Second pair of air-jets
    • A second pair of air-jets fed by a double wheeled turbine can be placed inside the machine for a more powerful drying of the boards.
  • 10 bar pump
    • Iit is possible to increase the washing pressure of the spraying manifolds in the second washing section by means of an inside 10 bar pump.
  • External 30 bar pump group:
    • It is possible to increase the washing pressure of the spraying manifolds in the second washing section by means of an external 30 bar pump group.
    • Filtering inox group with 6 cartridges. Filtering group oilsorb.

 

pola-e-massa
For more information, visit the website or send us your information request.

About Adeon

At Adeon we believe that it is the quality of our work that placed us in our current position, and quality is what we try to improve with everything we do. European PCB manufacturers are often challenged to produce many different designs and technology levels every day. This makes it challenging to select and provide equipment that is capable of doing that. Our goal is to offer the best service and support against affordable rates to the highest standards to help our customers to stay at the forefront of technological developments.

Contact

Weidehek 26
Industrial Area Haagse Beemden # 4530
NL-4824 AS Breda
The Netherlands
Telephone: (+31) (0)76 541 00 08
Fax: (+31) (0)76 542 50 59
E-mail: info@adeon.nl

More...