Slide background
Slide background
Slide background

A7-xw

   atg lm logo web 278x300

For Oversized Rigid and Flexible Boards

Special network technology and aerospace applications are driving the demand for high test coverage and 4-wire testing (Kelvin test) also for large PCBs.  

The A7-XW is based on the A7-16, but features an extra wide test area of up to 40”. Like the A7-16 it is equipped with between 16 and 24 test heads, up to 12 cameras for optical alignment and the latest motion system design with direct linear drive technology for highest accuracy and test speed even on large Format.

The system is designed to fully support ease-of-operation and best operator/machine ratio. The horizontal test position provides the advantage that one operator is able to load and unload heavy printed circuit boards. An optional moveable support table, which can be attached to the front of the test system, is available for loading and unloading.


KEY FEATURES

  • High speed high throughput test system for backpanel and server boards
  • 16 test heads (upgrade to max 24 test heads possible)
  • Test area 40" x 39,6" (1016mm x 1003mm)
  • Also available with 20 or 24 test heads for board sizes up to 43,3" x 59,2" (1100mm x 1500mm)

MACHINE FEATURES


MECHANICS

  • a7-xwBasic unit with 16 probes (8 top, 8 bottom)
  • Universal shuttle system with clamp mode for testing rigid boards 
  • Max. Panelsize: 1100mm x 1220mm (43.3" x 48.0") | Optional 1100mm x 1550mm (43.3" x 61.0")
  • Min. Panelsize: 190mm x 150mm (7.5" x 5.9")
  • Test area: 1016mm x 1003mm (40” x 39.5”) | Optional 1016mm x 1500mm (40.0" x 59.1")
  • Board thickness: up to 12mm (0.47")
  • 8 XGA Color Camera's (4 top / 4 bottom)
  • Smallest Pad size: 100µm (4.0 mil with Softouch Probes)
  • Smallest Pitch: 200µm (8.0 mil)
  • Resolution measurement system: ± 0.1µm (± 0.004mil)
  • Repeatable accuracy: ± 7.5µm (± 3.0mil)
  • Soft Touch Probes pressure: 5g to 10g


ELECTRONICS

  • Continuity test 1Ω - 10kΩ
  • Isolation test:
    • Up to 25MΩ (FM)
    • Up to 100GΩ (Ohmic)
    • MicroShort Detection® 
  • Test voltage: 100mV to 1000V 


GENERAL CONNECTIONS

  • Data input format: IPC-D-356A
  • Network connection: Ethernet, TCP/IP
  • Power Supply: 3 x 400V, 50Hz (3 x 208V, 60Hz), 1500VA
  • Compressed air: 8 bar /115 psi filtered
  • Temperature: 18°C to 27°C /66°F to 81°F, ±3K
  • Relative humidity: 40% to 60%
  • Machine weight: 2010kg

OPTIONS 

  • 4-wire Kelvin measurement with max. 300mA test current:
    • 0Ω to 1kΩ - Tolerance ± 2%, min. ± 25µΩ
    • With Kelvin probes contact pressure 0.3g to 2.5g
    • Smallest pad: 80µm (3.2 mil)*
    • Smallest pitch: 120µm (4.8 mil)*
    • *with Kelvin probe fine adjustment
  • Embedded Component test:
    • R 0Ω - 1MΩ - Tolerance ± 1%, min. ± 0.5Ω | 1MΩ - 200MΩ - Tolerance ± 3%
    • C 0F 100µF - Tolerance ± 2%, min. ± 30fF
    • L 0H to 10mH - Tolerance ± 5%, min. ± 0.25µH
  • Diode/Varistor: UF,UR, UBR 0V to 12.5V 
  • Retest of fault files from external grid test systems on inquiry
  • Repair software with barcode support 

RELATED PRODUCTS 

a5-neo a7    a7-16  a8-plus  a8-16


All information subject to change without notice!

For more information, visit the website or send us your information request.

 

Information request

Please type your full name.
Invalid email address.
Please send us your message.
Invalid Input