Slide background
Slide background

Manual Filling Squeegee

Hand tool designed for filling of through holes in Printed Circuit Boards 


Function: The paste is stored inside this tool and is pressed through the holes of the PCB's with compressed air, which is controlled by a foot switch. You simply control the compressed air as you slowly fill the holes. This is a "one step" process and there is no risk of getting air bubbles inside the holes. When you are finished, the Power Squeegee PS 100 is stored in the refrigerator.

The inks for this process are

  • Silver Paste (Conductive)ps100
  • Copper Paste (Conductive)
  • Epoxy Fill (Non-conductived)

Technical data

  • Length: approx. 4.3"
  • Diameter: 2.56"
  • Weight: approx. 2.5 lbs (including Paste)
  • Paste Capacity: 200g ( Silver Paste)
  • Material: Stainless Steel


  • Partial Plugging of Holes
  • No more waste from the very valuable Silver Paste
  • No clean up or change from the paste to storage containers
  • Using of up to 100 lbs pressure to push the paste through very high aspect ratio (1:30) boards
  • No direct contact between the compressed air and the paste

The result

Surfaces ground with Plane Raze Device SV 100


For more information, visit the website or send us your information request.

About Adeon

At Adeon we believe that it is the quality of our work that placed us in our current position, and quality is what we try to improve with everything we do. European PCB manufacturers are often challenged to produce many different designs and technology levels every day. This makes it challenging to select and provide equipment that is capable of doing that. Our goal is to offer the best service and support against affordable rates to the highest standards to help our customers to stay at the forefront of technological developments.


Weidehek 26
Industrial Area Haagse Beemden # 4530
NL-4824 AS Breda
The Netherlands
Telephone: (+31) (0)76 541 00 08
Fax: (+31) (0)76 542 50 59