Slide background
Slide background


Model: MD 4000


The Magazine Dryer is very easy to operate – install and operate! Different sizes of PCBs can be loaded into the magazines, e.g. at the screen printer or at the developer, and are brought to the dryer by transport carriages. The magazine can be pushed into the dryer and taken off at the outfeed. It runs above rolls in cycles through the dryer. The sizes of magazines depend from the sizes of PCBs.

Choosing the program button can activate the requested application. The 4 stored programs can be selected by pressing the respective button. The selected program is displayed.
The single steps of drying are loading, heating on, holding of temperature, cooling down, unloading. The loading and unloading area is accessible by glass doors. The sight windows allow the visual control.



  • Easy operation and installation
  • Very different PCB sizes and shapes are possible
  • Changeable magazine sizes
  • Big PCBs up to 760 x 760 mm, 30" x 30", can be run
  • Compact Dryer with small dimensions
  • Special design of magazines for unusual pcb sizes and shapes


  • Drying following screen printing (solder mask)
    • Approx. 20 min., 70 – 90°C, 160 –200°F
    • Approx. 100 pcbs/h
  • Drying after "Hole plugging"
    • Approx. 30 min., 145°C, 290°F
    • Approx. 80 pcbs/h
  • Drying after legend print
    •Approx. 20 min., 145°C, 290°F
    • Approx. 100 pcbs/h
  • Thermal bump
    • Approx. 10 min., 110-120°C, 250°F
    • Approx. 140 pcbs/h
  • Thermal curing
    • Approx. 60 min., 150°C, 300°F
    • Approx. 45 pcbs/h
  • Tempering of base material
    • Approx. 30 min., 135°C, 275°F
    • Approx. 80 pcbs/h

Technical data

  • Pcb sizes: Up to max. 760 x 760mm, 30" x 30"
  • Pcb-thickness: 0.2 – 15mm, 8 – 600 mil's
  • Dimensions: 4,570 (l) x 2,280 (h) x 1,980 (b) mm - 180" (l) x 90" (h) x 78" (w)
  • Electrical load: 3 x 400V, N, PE 45KW
  • Exhaust air: Max. 2,000 m3/h, 1,200CFM
  • Chilled water: 4 bar, max. 1.000 l/h, approx. 10°C - 60 PSI, max. 280 gallons/h, approx. 50°F
  • Compressed air: 6 bar, 90 PSI



For more information, visit the website or send us your information request.

About Adeon

At Adeon we believe that it is the quality of our work that placed us in our current position, and quality is what we try to improve with everything we do. European PCB manufacturers are often challenged to produce many different designs and technology levels every day. This makes it challenging to select and provide equipment that is capable of doing that. Our goal is to offer the best service and support against affordable rates to the highest standards to help our customers to stay at the forefront of technological developments.

Latest News

Upcoming events


Weidehek 26
Industrial Area Haagse Beemden # 4530
NL-4824 AS Breda
The Netherlands
Telephone: (+31) (0)76 541 00 08
Fax: (+31) (0)76 542 50 59