Slide background
Slide background
Slide background

Via Hole Filling Technology

mass logo

 

Vacuum Via Hole Filling Systems

vac overview picWith a wide range of Vacuum Hole Filling systems in our portfolio, we are capable to fullfil all needs and requirements for the manufacturing of all types of Printed Circuit Boards. From our partner Mass GmbH we offer a mix of single sided, double sided, horizontal, horizontal selective and vertical via hole filling systems. Mass has developed a unique design of the Filling Head technology in which the distribution of the resists (inks) is spread in the most controlled and even manner. Due to the full vacuum of the chamber, the vertical filling system enables double sided filling of micro-, and blind via technology in a simple one step process. The horizontal systems are designed especially on request of the telecom industry. With the horizontal systems Mass offers the possibility for vacuum filling screen printing as well as selective filling capabilities.
>> learn more

 

 Through Hole Filling Systems

vhf 20 200For small quantities of Through Hole Filling requirements we offer two systems with the VHF-20 & VHF-200. The VHF-20 is a purely manual operated system and the VHF-200 is semi-automatic in its X,Y movement. The VHF-200 also enables working with a stencil for selective or "partial" filling of through holes. Both systems are capable of applying conductive or non-conductive resins.
>> learn more

 

 

Grinding/Planarizing

grinding allPCB manufacturers need to carefully consider these variations when chosing the type of Planarization system. It occurs regularly that PCB manufacturers use a combination of different systems for different variaties of filled via's. ADEON Technologies BV offers a range a Planarization systems in partnership with both Mass GmbH and Pola & Massa srl. We offer a solution for each type of Planarizing needs whether through technology-, production requirements or a combination of both.
>> learn more


 

Options

Options allA variety of options are available to suit the needs of each technology requirement. We are offering a Large Container System for automatic refilling of the Cartridge when processing higher volume, a System Cleaning Station for cleaning of the Filling Heads and a Paste recovery system unique to the VCP-5000.
>> learn more







All information subject to change without notice! 

PeM-650

pola-e-massa

This small sturdy model was designed and built specifically for the removal of via hole pastes used in the hole plugging process. It thoroughly removes excess hole filler from PCB's. The machine is an evolution of Pola e Massa patented Multiroll machine for deburring and cleaning without ovalization of holes and has been successfully sold in the market for more than 10 years. Our consolidate experience has allowed us to build the PEM Planarizer with all the necessary technical improvements to achieve a perfectly flat surface for the "after hole plugging" treatment.

Wet processing brushing machine for:planarizer kopie

  • Via hole paste removal
  • metal surface treatment
  • deburring of sharp corners, hole edges and irregular perimeters

Main features

  • Vertical axis rotating and oscillating brushes
  • No hole ovalization
  • Control by PLC complete with touch screen
  • Adjustable brush pressure
  • Automatic zero set-point procedure
  • Variable brush speed
  • Adjustable belt conveyor speed
  • Different brush grit combinations are possible to control copper surface roughness

Further options for the PeM-650 Planarizer

  • orbital brushes10, 30 or up to 100bar Air-Jet Blowers in Drying Modules
  • Additional Drying/Washing Modules possible
  • Board position alternators on Entry Conveyor
  • Board Centering Alternators on Exit Conveyors
  • Choice of Length of Entry & Exit Conveyors
  • Anti Warpage System (AWP) for materials as thin as 65 micron (Standard 300 micron)
  • 3 different filtration possibilities
  • Copper Centrifuge
  • Cannister System
  • Paper filtration
  • Automatic Brush-Wearing Compensation
  • Automatic Brush Dressing and Foot-Print Cycles
  • Ultrasonic Washing

 All information subject to change without notice!

Evo-3000

Planarizer Evo-3000pola-e-massa

This small sturdy model was designed and built specifically for the removal of via hole pastes used in the hole plugging process. It thoroughly removes excess hole filler from PCB's. The machine is an evolution of Pola e Massa patented Multiroll machine for deburring and cleaning without ovalization of holes and has been successfully sold in the market for more than 10 years. Our consolidate experience has allowed us to build the PEM Planarizer with all the necessary technical improvements to achieve a perfectly flat surface for the "after hole plugging" treatment.

Wet processing brushing machine for:

  • Via hole paste evolution 3000removal
  • metal surface treatment
  • deburring of sharp corners, hole edges and irregular perimeters

Main features

  • Vertical axis rotating and oscillating brush
  • No hole ovalization
  • Control by PLC complete with touch screen
  • Adjustable brush pressure
  • Automatic zero set-point procedure
  • Variable brush speed
  • Adjustable belt conveyor speed
  • Different brush grit combinations are possible to control copper surface roughness

This new machine is the last evolution of our successful Pem Planarizer, still leading in the most important markets worldwide with more than 100 installations by the main PCBs manufacturers.
Our consolidated experience allowed us to develop a more flexible machine able to match all the complexities coming from the new build-up technologies in the multilayer manufacturing. This single brush module allows the perfect control of every movement of the tool in 3 different axis.
This machine can be useful for small productions and used to increase the capabilities of the existing Pem Planarizer Lines and can be integrated with washing and drying modules.

Option A; Selective Processing Mode

This innovative concept for a brushing machine has been developed to allow then machine to work on a selected area with orthogonal reference concerning where to move the brush and operate.
This Cartesian reference must be used to introduce the Panel on the left side on the entry conveyor belt, then, by dedicated information setup, the panel will be conveyorized through the machine till it reach the working position (X axis), the leading edge of the panel is read by the entry thickness detector.
Than the brush move to the panel and start to oscillate (Y axis) for a determined length by specific preset information.The brush height (Z axis) is determined by the measure of the panel entering on the belt conveyor (if in Automatic mode) or by thickness setup information (Manual mode).
By setting of the abrasion (Amperage) the brush will vertically adjust itself in order to hold the same abrasion on all the surface to be treated (only if in Automatic mode), but with the limit where cannot move lower than a kind of Lower Limit preset-able.evolution 3000 1

Option B; Selective Skipping Mode

This new concept has been developed in order to match the ultimate state of the art on PCB manufactures.
This machine is able to treat Rigid – Flex boards even if the vertical spindle axis (Z) is controlled to keep same level of abrasion on copper surfaces.
While the brush pass on the flexible areas, it skips the contact with the panel and move on the next area where it needs to be treated; this because it happens sometimes that there are no sensible differences between the copper surface and the level of the flex areas.
The same in this case the machine must be advised on where to skip and where not so that there are some data to setup about it.

Further options for the PeM- Evo-3000

  • 10, 30 or up to 100bar Air-Jet Blowers in Drying Modules
  • Additional Drying/Washing Modules possible
  • Board position alternators on Entry Conveyor
  • Board Centering Alternators on Exit Conveyors
  • Choice of Length of Entry & Exit Conveyors
  • Anti Warpage System (AWP) for materials as thin as 65 micron (Standard 300 micron)
  • 3 different filtration possibilities
  • Copper Centrifuge
  • Cannister System
  • Paper filtration
  • Automatic Brush-Wearing Compensation
  • Automatic Brush Dressing and Foot-Print Cycles
  • Ultrasonic Washing

 All information subject to change without notice!

Information request

Please type your full name.
Invalid email address.
Please send us your message.
Invalid Input

About Adeon

At Adeon we believe that it is the quality of our work that placed us in our current position, and quality is what we try to improve with everything we do. European PCB manufacturers are often challenged to produce many different designs and technology levels every day. This makes it challenging to select and provide equipment that is capable of doing that. Our goal is to offer the best service and support against affordable rates to the highest standards to help our customers to stay at the forefront of technological developments.

Upcoming events

Contact

Weidehek 26
Industrial Area Haagse Beemden # 4530
NL-4824 AS Breda
The Netherlands
Telephone: +31 (0)76 541 00 08
Fax: +31 (0)76 542 50 59
E-mail: info@adeon.nl

More...