A7 – The New Flying Prober Generation:
Higher Speed & Accuracy. Less Weight of Probe Impact
atg LM is launching an entirely new flying prober generation. The double-sided test system A7 has 8 test probes and 4 high resolution XGA color cameras for the optical scanning of PCBs.
Using modern linear drives, the A7 achieves a test speed which was unimaginable 5 years ago. The acceleration of the probes now has increased from 8 g to 20 g (20 times acceleration of gravity). Despite high deceleration forces, the extremely torsion resistant and light carbon fiber axes allow precise positioning. Minimal test structures of 35 μm can be contacted.
The system can be equipped with various test probes. Their contacting force can be adjusted to as little as 0.2 gram.
The A7 offers a variety of test options. Apart from the test of flexibleboards, the A7 focuses on the test of embedded components. Besides, passive components such as resistors, coils, capacities, diodes and varistors can be tested. The wiring test of active IC’s within the PCB is possible also.
>> Read more about A7
A5 Neo – New Entry Level Flying Probe Tester
Proven Technology, Lowest Cost of Operation
atg LM start the sale of a new version of the wellproven technology of the A5/A6 series with the A5 Neo.
The basic version of the system is equipped with a universal shuttle system with clamping and tension mode for flexible and rigid board testing and with soft touch pins reducing the witness marks on the boards.
In addition, the A5 Neo offers a variety of extensions, e.g. a Kelvin 4-wire measurement and the test of integrated components, new options such as a high voltage test up to 1000 Volt (Standard 500 Volt) and the test of integrated varistors and diodes. So the system follows the trend of higher integration in the bare board technology.
Developing the A5 Neo top priority was given to an economic and cost effective concept. So a minimum floor space and an attractive price are decisive advantages compared to the previous model.