LM400s Megamat
| 
| 
- This LM400s Megamat was introduced to bridge the gap between the LM400 Picomat and LM400 Megamat.
- Not only a size of test between Picomat and Megamat was required on by the market but also a more economical test electronics was needed.
- The LM400s Megamat has the same renowned speed, accuracy and throughput as the LM400 series and can test Medium to High density products without any difficulties.
- This is due to the combination of the LM fixture, special fixture frames, automatic alignment possibilities and the LM test electronics.
- The LM400s Megamat comes in 70mil and 50mil grids and with the capability of testing up to 1000 boards/hr.
- Ideal for:
- Manufacturers of rigid PCB’s
- Batch sizes of up to 100,000 PCB’s
- Test Area up to 325 x 406 mm (12.8” x 16”)
- Pad / Pitch = 0.04 / 0.10"
- Special testing requirements (4-Wire)
- Board Handling:
- Minimum board size (X, Y) 50 x 50 mm (1.97” x 1.97”)
- Maximum board size (X, Y) 460 x 540 mm (18.1” x 21.26”)
- Minimum board thickness
- manual testing 0.1 mm (0.0039”
- automatic testing 0.6 mm (0.023”) - Maximum board thickness 8 mm (0.315”)
- Test Points:
- (1 mil = 1 / 1000 inch = 0.025 mm) one side / both sides
- In pure 70 mil (200 testpoints / inch²) 40,960 / 81,920
- In Share Grid® 70 / 50 mil 81,920 / 163,840
- (200 / 400 testpoints / inch²)
- In pure 50 mil grid (400 testpoints / inch²) 81,920
Information Request
Click here to send us a request about
.