LM400 Picomat
| 
| 
This machine is regarded as the ultimate Universal Grid electrical tester.- In respect to speed, accuracy and throughput it’s hard to find a machine which can compete.
- The LM400 Picomat is renowned for its ability to test Medium to High density products without any difficulties.
- This is due to the combination of the LM fixture, special fixture frames, automatic alignment possibilities and the LM test electronics.
- The LM400 Picomat comes in 70 mil and 50 mil grids and with the capability of testing up to 1200 boards/h.
- The Picomat can be equipped with special electronics for process control using Low Ohm measurements.
- Ideal for:
- Manufacturers of rigid PCB’s
- Batch sizes of up to 100.000 PCB's
- Pad / Pitch = 4 / 10 mil
- Special testing requirements (4-Wire)
- Test Field Size:
- Maximum (X x Y) 244 x 325 mm (9.6” x 12.8”)
- (smaller field sizes available upon request)
- Board Handling:
- Minimum board size (X, Y) 50 x 50 mm (1.97” x 1.97”)
- Maximum board size (X, Y) 284 x 365 mm (11.2” x 14.4”)
- Minimum board thicknes
- manual testing 0.1 mm (0.0039”
- automatic testing 0.6 mm (0.023”) - Maximum board thickness 8 mm (0.315”)
- Test Points:
- (1 mil = 1 / 1000 inch = 0.025 mm) one side / both sides
- In 70 mil (200 testpoints / inch²) 24,576 / 49,152
- 50 mil (400 testpoints / inch²) 49,152 / 98,304
Information Request
Click here to send us a request about
.