ABL 30 Evaporater
| 
| 
Capacity: 2 pcbs per minute
A) Function:
Freshly coated pcbs have to be evaporated before drying. Pcbs enter the paternoster across belts. They are transported on racks. These racks can be flat or V-shaped. If both pcb sides are coated, the rack has to be V-shaped. In this case the pcb only lies on its exterior edges on the rack and is lifted above within a cycle of 30 sec. Then the pcb is pushed to the outfeed side and cycled downwards. The pcb runs through several zones of evaporation with a temperature of approx. 30°C. The solvents can escape with ease. The ink remains absolutely "alone". The following drying process is prepared perfectly.
B) Advantages:
• Automatic in- and outfeed
• Careful transport on racks
• Additional period of rest before drying
• Space- saving compact design
C) Specification:
| Basic frame: Panelling: Max. pcb- size: Min. pcb- size: Loading capacity: Connection load: Fresh air: Exhaust air: Ext. dimensions: Length of in-/outfeed: Weight: |
Tubular steel, painted blue, IC 198 Steel sheets, powder coated, acc. RAL 7035 610 x 610 mm 250 x 350 mm 30 pcbs 6 KW Room air 2000 m³/h 2,500 mm (l) x 2,600 mm (b) x 2,000 mm (h) 500 mm 4 t |
| D) Options/ Alternatives : | |
| ADS Evaporation track |