  |
|
| - ABL 30 Evaporator |
|
|
| - IR/16 KW IR-Dryer |
|
|
| - MD4000- Magazine Dryer |
|
| - Multi-Level-Dryer |
|
|
| - VDH 248 Vertical Dryer |
|
|
|
|
|
|
|
|
| |
Adeon Technologies BV
Weidehek 26
4824AS Breda
The Netherlands
Phone: +31 (0)76-5410008
Fax: +31 (0)76-5425059
 E-mail us
|
|
|
|
|
|
|
 |
|
 |
|
|
|
| |
    |
|
|
 |
|
| |
 The Magazine Dryer is very easy to operate – install and operate!
Different sizes of PCBs can be loaded into the magazines, e.g. at the screen printer or at the developer, and are brought to the dryer by transport carriages. The magazine can be pushed into the dryer and taken off at the outfeed. It runs above rolls in cycles through the dryer. The sizes of magazines depend from the sizes of PCBs.
Choosing the program button can activate the requested application. The 4 stored programs can be selected by pressing the respective button. The selected program is displayed.
The single steps of drying are loading, heating on, holding of temperature, cooling down, unloading. The loading and unloading area is accessible by glass doors. The sight windows allow the visual control.
Features:
• Easy operation and installation
• Very different PCB sizes and shapes are possible
• Changeable magazine sizes
• Big PCBs up to 760 x 760 mm, 30' x 30', can be run
• Compact Dryer with small dimensions
• Special design of magazines for unusual pcb sizes and shapes
The applications:
1. Drying following screen printing (solder mask)
Approx. 20 min., 70 – 90°C, 160 –200° F Approx. 100 pcbs/h
2. Drying after 'Hole plugging'
Approx. 30 min., 145°C, 290° F Approx. 80 pcbs/h
3. Drying after legend print
Approx. 20 min., 145°C, 290° F Approx. 100 pcbs/h
4. Thermal bump
Approx. 10 min., 110-120°C, 250° F Approx. 140 pcbs/h
5. Thermal curing
Approx. 60 min., 150°C, 300° F Approx. 45 pcbs/h
6. Tempering of base material
Approx. 30 min., 135°C, 275° F Approx. 80 pcbs/h
Technical data:
Pcb sizes: Up to max. 760 x 760 mm, 30' x 30'
Pcb-thickness: 0.2 – 15 mm, 8 – 600 mil’s
Dimensions: 4,570 (l) x 2,280 (h) x 1,980 (b) mm
180' (l) x 90' (h) x 78' (w)
Electrical load : 3 x 400 V, N, PE 45 KW
Exhaust air: Max. 2,000 m3/h, 1,200 CFM
Chilled water: 4 bar, max. 1.000 l/h, approx. 10°C
60 PSI, max. 280 gallons/h, approx. 50°F
Compressed air: 6 bar, 90 PSI
|
|
|
|
|
 |
|
 |
|
|
